Cody the waterproof JS polymer cement waterproof coating is modulated by a unique formula of polymer modified cement-based waterproof materials. It is a two-component slurry, the powder is by the quality of cement, selected graded silica powder and unique polymers; additive is a polymer synthetic polymer emulsion. With slurry than the uniform mixture of powder and additives, brushing, cut off at the desired site of the structure of water molecules within the channel, and thus play a waterproofing effect. 

 Scope of application 
 * Cement concrete structures. Mortar masonry buildings. Such as: basement, kitchen, bathroom, bathroom, terrace, balcony, laundry room, garage, pool, swimming pools, sewage tanks, etc.. 

 Advantages 
 * Super water impermeability, elongation, tough coating; 
 * Wet and dry base surface can be construction, has a strong adaptability of building works; 
 * Strong adhesive, has excellent bonding properties of various base surface; 
 * Environmentally friendly products, safe and nontoxic, pollution-free, simple construction, short construction period. 
 * Waterproof layer to prevent moisture, salt, pollution, and to inhibit mold growth; 
 * Concrete coated with a waterproof layer can still maintain good ventilation; 
 * Suitable for occasions of long-term flooding. 

 Surface preparation 
 * The substrate should have a rough, no cracks, no grease, clean flat solid surface structure; yin and yang, corner wipe arc or obtuse angle to prevent cracks. 
 * Before brushing pulp, pre-moisten the substrate, but not water. 

 Mix 
 The powder into the plastic bucket, mechanical stirring 3 minutes to precipitate the colloid, and then stand for 3 to 5 minutes, stirring once again you can use. Should be kept in the course of intermittent stirring to prevent the precipitation of slurry. 

 Construction technology 
 * Use a stiff brush, roller or spraying machine will be evenly mixed slurry brushing or spraying on a moist substrate; 
 * Hierarchical construction of the second layer, brushing direction perpendicular to the first layer, in order to facilitate to achieve the best coverage; 
 The thickness of each layer brushing is not too thick a coating thickness should not exceed 1 mm, in order to facilitate the conservation of curing. 

 Closed water test 
 * Construction of waterproof layer to complete 48 hours after (lower temperature or ventilation of the closed water test may be appropriate to delay); 
 * Shuts the water is not less than 24 hours can be carried out by the inspection and no leakage after paving or construction Next. 

 Note 
 * Construction of the temperature should be 5 ° C to 35 ° C; 
 * Used within the slurry 1 hour after the opening tune; 
 * First wetting the base surface with water after construction, the base surface can not be stagnant water; 
 * Use this product, do not mixed with water or other materials; 
 Pre-construction, please read carefully the construction instructions, to obtain reliable and satisfactory construction; 
 Construction, please use the appropriate protective measures, such as gloves. 

 Reference to the amount 
 Waterproof membrane thickness of 1.0mm, the theoretical amount of about 1.5 - 2.0kg/m2. Dosage refers to the total amount of powder and liquid, the actual amount depending on the concrete base surface. 



 Shelf life: in normal storage and transport conditions, the shelf life of 12 months. 

 Packaging Specifications: 5KG, 9KG, 18KG, 30KG 

 Specific reference http://www.ken-de.com